Actuators > Part - turn Actuators
  General information to part-turn actuators SG 05.1 - SG 12.1
  Part-turn actuators SG are available in 3 versions:
  • Part-turn actuators for open-close duty
    SG 05.1 - SG 12.1
    Torque range: 90 Nm - 1 200 Nm
    Operating times for 90 : 4 - 180 s
  • Part-turn actuators for open-close duty
    in explosion-proofed version
    SGEx 05 - SGEx 12
    Torque range: 90 Nm - 1 200 Nm
    Operating times for 90: 4 -180 s
  • Part-turn actuators with integral motor controls
    SG 05.1 - SG 12.1 AUMA MATIC
    (see description below)

The part-turn avtuators are available with single phase- and 3- phase-motor. At the single-phase version the operating time is adjustable by turning a potentiometer.


SG 05.1 - SG 12.1 in version AUMA NORM

     
 

Part-turn actuators SG in the
desulphurization unit of a coal power plant

AUMA part-turn actuators SG fulfil a high standard for the operation of valves.
  • robust design
  • high enclosure (watertight)
  • reliable operation
  • wide torque range
  • operation possible in any mounting position
  • easy commissioning
  • low service requirements
     
  Part-turn actuators with integrated actuator controls
AUMA MATIC

As an option the actuator controls AUMA MATIC are available for the entire part-turn actuator type range SG 05.1 to SG 12.1
The application of actuator controls AUMA MATIC offer advantages during:

  • project design
  • valve automation
  • start up and commissioning
  • operation

In many cases, integral actuator controls provide a more cost-effective solution than remote motor controls.

Part-turn actuators SG 05.1 - SG 12.1 with actuator controls AUMA MATIC

 
   
         
Copyright 2001  Sunny Valves & Intertrade corp.,ltd.
231/13 Yen-A-Kard 2, Yannawa, Bangkok 10120
Ph: 02-240-0656-8 Fax: 02-240-1095
  sales@sunnyvalves.co.th